Aluminum piping with a raw, T6060 finish. 3 millimeter wall thickness makes it suitable for welding and constructing own applications. The pipe would benefit from either being polished or painted after the welds have been completed. All in order to prevent the pipe aluminum from oxidating. To ensure your hose from not popping off, making a nice and secure rounding, a hose joiner can be cut in half and welded on. Fitting hose joiners for the desired pipe is found during Accessories by each article. Very high quality!
These bends have a very narrow center radius, making them very suitable for tight spaces.
These bends have a very narrow center radius, making them very suitable for tight spaces.
| Bend: | 90&176; short radius degree |
| Outer diameter: | 45 mm |
| Outer diameter: | 1,75" inch |
| Leg length (see picture): | 0 mm |
| Wall thickness: | 3 mm |
| Center-line radius: | 57 mm |
| Material: | 6060 |
| Possible to weld: | Yes |
| Bead Rolled ends: | No |